Very very good with extra 1/4 holes a must

L'usinage laisse a désirer : un pas de vis est récalcitrant.

Die Lieferung war pünktlich und die Verpackung gut. Vielleicht hätte man auf die Luftpoltserfolien zur Verpackung der beiden Teile verzichten können.Die L-Halterung muss noch zusammengeschraubt werden, was mit den Schrauben und dem mitgelieferten Werkzeug sehr einfach geht. Auch hier hätte man sicher statt zwei Sechskant-Schlüsseln mit einem auskommen können. Zusammengeschraubt ist die Halterung stabil, so dass ich mir keine Sorgen um meine Kamera mache.Preisleistungsverhältnis: sehr gutWürde ich wieder kaufen? Ja

I've just received this L-bracket. Normally I wait a few months to write a review but in this case, as there are no mechanical or electronic working parts and I see no reason why there should be any wear or tear issues. Assembled in moments without the need to look at any instructions, it simply fits together via two solid hex-head screws via the Alum or Allan key provided. The screw for attaching to the base-plate of the camera is easy to locate and unfold with the fingers and does not require over tightening as the base of the camera grips onto the rubber mounting of the bracket so nicely that I found it was secure without any movement even though if I wanted I probably could have given it another half turn however it wasn't necessary. I tested for any movement and there was nothing. The slot on the plate to which the camera fits is long enough that I could have ensured the battery compartment was clear to open by moving the camera further along the bracket. My Peak Design travel tripod uses an Arca Swiss compatible quick release clamp and the bracket fitted perfectly onto the clamp of the tripod head making the transition from horizontal to vertical almost instantaneous. I'm now confident that when mounted vertically, the centre of gravity for the camera is always centred nicely and I need not fear any over-balance issues when turning the camera on its side rather than rolling the ball head and camera over together with the weight being off-centre.For those video people amongst us, there are plenty of additional standard screw holes in both plates for additional mics and equipment.On one particular review I read there was some concern about a possible lack of strength with the two plates being held together with screws. Not only do I not see this as a strength issue since the screws are substantial enough to bear more weight than a full size DSLR body and lens but I view it as a bonus. I am shortly travelling around the Philippines and I can easily take the bracket apart if I want and lay the two halves of the bracket flat into what will become quite a tight space in my back-pack although in every day use, I am likely to leave them connected as an L-plate.In short, this appears to be a great sturdy bit of kit at a very reasonable price. It remains to be seen if the glue holding the rubber grip onto the plates withstands the heat of the tropics but so far, 10/10. I will update this review if I come across any problems, which I think are unlikely.

Suchte einen L-Winkel für meine Sony. Für sie gibt es einen speziellen Winkel der aber schlecht abschneidet da das Batteriefach nicht mehr zugänglich sei. Also kam er für mich nicht in Frage. Dann diesen Universal Winkel bestellt und festgestellt dass er zum einen top verarbeitet ist, keine Grate die stören, nichts. Sie passt wunderbar unter die Kamera, man kommt an alle Eingänge. Ich lasse sie immer an der Kamera. Man kann die Schiene leicht verschieben und in die gewünschte Position bringen. Für mein Stativ perfekt. Rasend schnell von der Horizontale in die Vertikale. Ich bereue es nicht sie für das wenige Geld gekauft zu haben und kann den L-Winkel uneingeschränkt empfehlen!!