Consiglio al produttore di non essere marketplace per evitare spiacevoli inconvenienti con i corrieri

Works as expected, with the exception that the valves are sized for a much larger flow than these ford tractors can provide (~4gpm max) which results in effectively very little control over flow rate.As another review stated box was in extremely poor shape upon arrival.Valve body is massive and the handles are in a poor position. Valve will interfere with the seat. I first tried it on a 3500 industrial, but the size and orientation of the handles (spools face fore and aft, if they were positioned crosswise they would clear much better.) compined with a dual stick transmition makes it hard to get on and off of the tractor.Moved to a ford 601 and it works better as it has a suspension seat and a single stick.I am also quite tall so i have the seat set all the way to the rear and that helps with clearence.

Box arrived beat up/ quarter opend and the my valves body had a bunch of paint chips from shipping probably, The paint seems a bit thin not a quality paint job. ALL PARTS look to be a little dirty, paint chips dust, I recommend cleaning before install. One hydraulic lines rubber of nicked up and missing a little chunk. The rear bracket pictured is not the one I got but the one I got works fine for me. I installed it on my tractor and unless I messed something up with an oring it is leaking at the base very slowly. I plan to check it out tomorrow. OVERALL seems to be decent if I can stop the leak

Perfekt um einen alten Traktor aufzurüsten.